Protocol Analyzer, Data Error Tester, Network Performance Analyzer, Fast Ethernet Analyzer, V5 Signal Analyzer, WAN Analyzer, ISDN Protocol Analyzer, xDSL Tester, SS7 Tester、ATM Tester, etc
| № |
Name of measuring instrument |
Parameter |
Category/ Typical
model |
Name,
Code of calibration regulation |
Measuring
range |
Best
Measurement Capability Expanded As An uncertainty |
| 24 |
SS7 Tester |
E1interface |
frequency |
QSZ-7 |
TMC-XZ-001
SS7
Tester Specification of calibration |
2M |
2*10-7 |
| Output pulse shape |
Amplitude 0.01~0.03V, |
| Output jitter |
0.01UIpp |
| Input jitter tolerance |
3.5% |
| 40 |
Network performance Analyzer |
Electrical Interface Test |
Allow loss |
Network
performance Analyzer SmartBits
2000 |
TMC－OS－006 Electrical/Optical
interface parameter of Digital Telecommunication calibration operate
criterion |
6~12.7dB |
|
| The return loss at the input port |
Frequency 51.2kHz ~240MHz |
1dB |
| Rate offset at input |
大于± 50×10-6 |
|
| Maximum peak-to-peak jitter at an input
port |
Jitter frequency 20Hz ~20MHz Jitter amplitude 0~20UIpp |
3.5% |
| Pulse shape at output |
HDB3、CMI |
Amplitude 0.01~0.03V Time Interval 0.1~1ns |
| Maximum peak-to-peak jitter at an output
port |
Jitter amplitude 0~10UIpp |
5.8% |
| Frequency (or Rate) |
2M~
622M |
2×10-7 |
| 40 |
Network performance Analyzer (continue） |
Optical Interface Test |
Optical wavelength |
Network
performance Analyzer SmartBits
2000 |
TMC－OS－006 Electrical/Optical
interface parameter of Digital Telecommunication calibration operate
criterion |
800~1600nm |
1nm |
| Maximum spectrum width |
| Average optical power |
-80dBm~+3dBm |
2% |
| Minimum sensitivity |
| Maximum bit rate offset of optical signal
at input |
2M~
622M |
jitter：±5%×measure value±0.1 |
| 40 |
Network performance Analyzer (Continue) |
Optical Interface Test |
Maximum
peak-to-peak jitter at an input port |
Network
performance Analyzer SmartBits
2000 |
TMC－OS－006 Electrical/Optical
interface parameter of Digital Telecommunication calibration operate
criterion |
2M~
622M |
jitter：±5%×measure value±0.1 |
| Maximum peak-to-peak jitter at an output
port |
| Minimum extinction ratio |
155M~
622M
622M~
2.5G |
1% 0.8% |
| Sys mask |
| Rise time |
| Faill time |
| jitter |
| Transfer performance: All parameters |
1.1. TMC-XZ-01-010 1.2. Network
performance Analyzer calibration operate criterion |
10/
100M interface |
100ns |
| Coding Function: All parameters |
10/100Methernet |
|
| 52 |
Protocol Analyzer |
Electrical
Interface Test |
Allow loss |
Protocol Analyzer J
2300C、interwatch 95000、AX/4000、RADCOM series |
Protocol Analyzer calibration operate
criterion TMC-XZ-01-019 |
6~12.7dB |
|
|
| Minimum signal-to-interference
ratio |
18~20dB |
|
|
| The return
loss at the input port |
Frequency 51.2kHz ~240MHz |
1dB |
|
| Rate offset
at input |
大于± 50×10-6 |
|
|
| Maximum
peak-to-peak jitter at an input port |
Jitter frequency 20Hz ~20MHz Jitter amplitude 0~20UIpp |
3.5% |
|
| Pulse shape
at output |
HDB3、CMI |
Amplitude 0.01~0.03V Time
Interval 0.1~1ns |
|
| Maximum
peak-to-peak jitter at an output port |
Jitter amplitude 0~10UIpp |
5.8% |
|
| Frequency (or Rate) |
2M~
622M |
2×10-7 |
|
| 52 |
Protocol Analyzer (cont.) |
Optical Interface Test |
Optical
wavelength |
Protocol Analyzer SmartBits
2000 |
Protocol Analyzer calibration operate
criterion TMC-XZ-01-019 |
800~1600nm |
1nm |
|
| Maximum
spectrum width |
|
| Average optical power |
-80dBm~+3dBm |
2% |
|
| Minimum
sensitivity |
|
| Maximum bit
rate offset of optical signal at input |
2M~
622M |
5.8% |
|
| Maximum peak-to-peak jitter at an input port |
2M~
622M |
5.8% |
|
| Maximum peak-to-peak jitter at an output port |
|
| 52 |
Protocol Analyzer (cont.) |
Optical Interface Test |
Minimum extinction ratio |
Protocol Analyzer SmartBits
2000 |
Protocol Analyzer calibration operate
criterion TMC-XZ-01-019 |
155M~
622M
622M~
2.5G |
1% 0.8% |
|
| Sys
mask |
|
| Rise time |
|
| Faill time |
|
| jitter |
|
| 25 |
ISDN tester |
timing extraction jitter（TE） |
PT500, CoBRA, 830e, sunrise,
LM2000, HPJ2302B |
TMC-XZ-002-2002 ISDN tester calibration criterions |
0~0.5UI |
0.4%UI |
| Total
phase deviation input to output（TE） |
±1UI |
0.6%UI |
| output
jitter（NT） |
0~0.5UI |
0.4%UI |
| Transmitter
output impedance |
15W~25W |
2Ω |
| Receiver
input impedance |
100W~5kW |
2kHz≤f≤300kHz，＜5%test value； f＞300kHz， ＜7% test value |
| peak
current |
0.1mA~1mA |
30μA，i≤60μA；5 test value，i＞600μA |
| output
pulse shape |
–30mV~+210mV,5.6W; –75mV~+825mV,50W; –75mV~+2025mV,400W |
15mV，5.6Ω&50Ω； 20mV，400Ω |
| pulse
unbalance |
0%~±10% |
area，2.5% amplitude，2% |
| unbalance |
38dB~78dB |
0.5dB |
| 25（continue） |
ISDN tester |
impedance & return loss |
PT500, CoBRA, 830e, sunrise, LM2000, HPJ2302B |
1.3. TMC-XZ-002-2002 ISDN tester
calibration criterions |
0dB~25dB |
5kHz~200kHz，ar=10dB~25dB， 0.5dB 1kHz~200kHz，ar=0dB~35dB， 1.5dB |
| pulse
shape |
400MHz |
1.25% |
| longitudinal
unbalance |
20dB~70dB |
2kHz~50kHz，as=20dB~55dB， 0.5dB 2kHz~50kHz，as=55dB~70dB， 1.5dB 0.5kHz~200kHz,as=20dB~55dB， 1.5dB 0.2kHz~0.5kHz,as=20dB~45dB， 3dB 200kHz~1MHz,as=20dB~45dB， 1.5dB |
| longitudinal
output voltage |
-40dBV~-90dBV |
2.5kHz~170kHz,agl=-40dBV~-50dBV, 0.5dBV 170kHz~300kHz,agl=-50dBV~-80dBV,
1.0dBV |
| power density |
frequency range：2.5kHz~1MHz；lever test range：-20dBm/Hz~-86dBm/Hz |
1dB |
| 25（continue） |
ISDN tester |
total power |
PT500, CoBRA, 830e, sunrise, LM2000, HPJ2302B |
1.4. TMC-XZ-002-2002 ISDN tester
calibration criterions |
frequency
range：100Hz~80kHz；lever test range：10dBm~15dBm |
0.5dB |
| transmitter
linearity |
-128dB~-20dB |
50Hz |
| E1：bit rate |
0~16UIpp |
0.1×10-6 |
| E1：pulse shape |
400MHz |
1.25% |
| E1：output jitter |
0~16UIpp |
0.1×10-6 |
| E1：input jitter tolerance |
0~16UIpp |
0.1×10-6 |
| E1：input bit rate tolerance |
0~16UIpp |
0.1×10-6 |
| E1：input attenuation tolerance |
0~16UIpp |
0.1×10-6 |
| E1：return loss |
50Hz~25MHz |
0.2dB |
| E1：input interfere immunity characteristics |
0~16UIpp |
0.1×10-6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
